First-Aid Kit for your Ship  “SHiP+AiD”
Any repair of your ship is made possible with this one!
Let’s repair your ship easy & quickly with SHiP+AiD.

《Three of the merit of SHiP+AiD》

  1. In a pinch, you can rush to the scene to take in hand the “SHiP+AiD” without hesitation.
    Every time, without having to look for a required repair materials, everything is OK, if you have a “SHiP+AiD” !
  2. Superintendent, chief engineer & the crew can have the common recognition for the repair material has been standing in your ship.
    In “right repair materials in the right place”, anyone can be reliably repair!
  3. The contents of “SHiP+AiD” always be kept constant quantity, it is possible to inventory management.
    The prevention of “Three No” : “No more” & “No longer available” when needed, are “No more”.

“SHiP+AiD” will greatly reduce the work time-consuming to repair than ever before with a simple repair. And surely that to stop the leak, backtracking work, and eliminate repetitive tasks!

It is cost-effective! ! !


“Red Epoxy” has made it possible to repair high pressure hydraulic piping which was impossible to repair owing to its strong adhesion! Bleeding from pinholes and joints of hydraulic piping… From now on repair all with “Red Epoxy”. Furthermore, it can strongly adhere also to PP (polypropylene)!

There is no need to give up already. All settled at “Red Epoxy”!

<Example of use>
・Repair of high press. hydraulic piping
・Repair of PP piping
・As a substitute for welding in places where welding is not possible

Click here for product details
※Corresponding product:SHiP+AiD Deluxe

Since “RapidFix” does not choose the material, you can use the almighty. Further, by using powder glass, it is possible to obtain a strength ever. The use is infinite depending on your idea!
Since the liquid does not solidify in the container, it can be used up to the end at room temperature storage! ! !

<Example of use>
Repair of water, seawater, fuel piping etc.
(Only when the repair part is at the upper side)

・Repair of hose (Patch)
・Fill-in & Re-tapping of screw hole

Click here for product details
Click here for the video
※Corresponding product:SHiP+AiDSHiP+AiD Deluxe

“Rector Seal” is easily cured with just mix and knead the putty that became a two-layer. The epoxy realize a low price than putty metal-based. Furthermore, since the storage is good, it can be used for a long time even if not exhausted.

<Example of use>
Repair of water, sea water, fuel, aux. steam piping
・Reinforcing thin wall of piping & pump casing
・Mold parts
・Adhesive bond for board and board (any material)

Click here for product details
Click here for the video
※Corresponding product:SHiP+AiDSHiP+AiD Deluxe

“Arlon Tape” is because the self-bonding, can also be repaired with no place of work space, such as a pipe rack if they have space to pull it! The places that can not be repaired with bicycle tubes can also be repaired.

<Example of use>
Repair of water, sea water, fuel, aux. steam piping
・Repair of leakage under pressure

Click here for product details
Click here for the video
※Corresponding product:SHiP+AiDSHiP+AiD Deluxe

By using “Rector High Tape”, leakage repair of the pipe is, of course, but you can use as a reinforcement of the place that became thinner wall thickness before the pipe is leaking as preventive measures. We offer at an affordable price than other companies of similar products.

<Example of use>
Repair of water, sea water, fuel, aux. steam piping
・Reinforcing & protective materials for various piping

・Reinforcing for a handrail

Click here for product details
Click here for the video
※Corresponding product:SHiP+AiDSHiP+AiD Deluxe

By using “Rector Sun Sheet”, that troublesome FRP repair is just cut & pasted and completed in 15 minutes with ultraviolet rays! Because it is sticky, it adheres to any material. Moreover, it is very soft before curing, so it also fits corrugated sheet and corner part.

<Example of use>
・Repair of hull for lifeboat
・Patch of non-strength part
・Patch of non-weldable part

Click here for product details
※Corresponding product:SHiP+AiD Deluxe

“LeakAid” is compatible with oil, so it adheres to the oil surface and can be repaired with immediate curing. It is suitable for air and refrigerant piping as a leak stopper, and works in situations where putty have failed to stop leaks.

*While mineral oils are effective with “LeakAid” , synthetic oils may vary in duarability depending in their composition.

<Example of use>
・Repair of hydraulic, air and refrigerant piping
・Repair of various ail, water and gas leaks

Click here for product details
※Corresponding product:SHiP+AiDSHiP+AiD Deluxe

“Pow-R Patch” is a fiberglass tape coated with epoxy resin that adheres to the repaired area in 15 minutes. It is compatible with all types of materials and lasts for a long period of time, not just for emergency repairs.

<Example of use>
・Repair of tanks, piping, flat and curved sections
・Repair of all metals, PVC and all other materials

Click here for product details
※Corresponding product:SHiP+AiD Deluxe

 You can use as a repair material for high-temperature exhaust gas system gas leak by using “Resbond”. Since it can also be used as a sealing material of the flange of the exhaust gas system, please use when the gas leakage from the flange does not stop.

<Example of use>
・Repair of boiler exhaust gas flange leak
・Repair of exhaust gas piping leak (indoor only due to water solubility)
・Repair of expansion joint crack

Click here for product details
※Corresponding product:SHiP+AiDSHiP+AiD Deluxe

You can use as a repair material in water and on wet surfaces by using “Aqua Stick”. Each molecule adheres to the applied surface with strong force to form a strong adhesive film with waterproof properties.

<Example of use>
・Repair of leaking pipes and hume pipes
・Repair of tiles and ceramics

Click here for product details
※Corresponding product:SHiP+AiD Deluxe


Click here for product details
※Corresponding product:SHiP+AiD, SHiP+AiD Deluxe

《Lineup of SHiP+AiD》

SHiP+AiD STANDARD
Based on the advice from superintendents of ship management company, we gathered the repair materials, which are needed for ship repair, in this one. When considering to introduce SHiP+AiD, please try the standard version for your ship at the first.

SHiP+AiD DELUXE
A deluxe version is including a product lineup that also supports large diameter piping and “Red Epoxy” which can repair high pressure hydraulic piping. Heavy users who want to repair anything in your ship, please consider deluxe version by all means.


*SHiP+AiD is our original product.

*Click here for SHiP+AiD Catalog

*Click here for Safety Data Sheet (go to other site) 

First-Aid Kit for your ship “SHiP+AiD” – THE MOViE –

SALES NETWORK

AFS Europe

Florijnstraat 25, 2988CL, Ridderkerk, The Netherlands
Tel:+31(0)85-732-5948
Mob: +31-(0)642-151-848 / +31-(0)614-358-358
E-mail: info@afs-europe.nl
Website: www.afs-europe.nl

※Looking for distributor in the world.